(03) 8210 5350 Customer Support

Showing 1–12 of 13 results

Automatic Impulse Sealer WN-455A

RM 1800.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.

Automatic Impulse Sealer WN-605A

RM 2200.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.

Cling Wrap Tray Wrapping Sealer TW-450E

RM 550.00

Cling film Tray Wrapping Sealer incorporates two support rollers for the cling film Roll to be used and a stainless-steel support bridge that allows the film to pass under the product to be wrapped. It adopts electronic constant temperature control for cutting and shrinking. Cling film tray wrapping sealer is widely used to pack cling film on food, vegetable for retaining freshness, which is an ideal equipment for supermarket and buffet.

Continuous Band Sealer Horizontal Type BS-770AIII

RM 1800.00

This machine is suitable for sealing small packaging products as the standard control panel consist of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Horizontal Type BS-810AIII with Solid Ink Coding

RM 3800.00

This machine is suitable for sealing small packaging products as the standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Vertical Type (Stainless Steel) BS-770AII

RM 1800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Vertical Type (Stainless Steel) BS-810AII with Solid Ink Coding

RM 3800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Foot Press Impulse Sealer PFS-450

RM 700.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation

Foot Press Impulse Sealer PFS-650

RM 850.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating Element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation.

Foot Type Manual Direct Heat Sealer W-300D

RM 1400.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.
** Installation can be request when using self-collect method.

Foot Type Manual Direct Heat Sealer W-450D

RM 1600.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.

Hand Sealer FS-200

RM 90.00

Hand sealer is a convenient and economical sealing equipment for variety industries such as shops, home and factories. Hand sealer is convenient as it is easy to be operated and portable. This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. Suitable Heating Element: OD 0.5mm (round)

Continuous Band Sealer Vertical Type (Stainless Steel) BS-770AII

RM 1800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Horizontal Type BS-770AIII

RM 1800.00

This machine is suitable for sealing small packaging products as the standard control panel consist of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Vertical Type (Stainless Steel) BS-810AII with Solid Ink Coding

RM 3800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Horizontal Type BS-810AIII with Solid Ink Coding

RM 3800.00

This machine is suitable for sealing small packaging products as the standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Foot Type Manual Direct Heat Sealer W-300D

RM 1400.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.
** Installation can be request when using self-collect method.

Foot Type Manual Direct Heat Sealer W-450D

RM 1600.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.

Cling Wrap Tray Wrapping Sealer TW-450E

RM 550.00

Cling film Tray Wrapping Sealer incorporates two support rollers for the cling film Roll to be used and a stainless-steel support bridge that allows the film to pass under the product to be wrapped. It adopts electronic constant temperature control for cutting and shrinking. Cling film tray wrapping sealer is widely used to pack cling film on food, vegetable for retaining freshness, which is an ideal equipment for supermarket and buffet.

Hand Sealer FS-200

RM 90.00

Hand sealer is a convenient and economical sealing equipment for variety industries such as shops, home and factories. Hand sealer is convenient as it is easy to be operated and portable. This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. Suitable Heating Element: OD 0.5mm (round)

Hand Sealer FS-400

RM 170.00

Hand sealer is a convenient and economical sealing equipment for variety industries such as shops, home and factories. Hand sealer is convenient as it is easy to be operated and portable. This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. Suitable Heating Element: 0.2x3mm, OD 0.5mm (round)

Foot Press Impulse Sealer PFS-450

RM 700.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation

Foot Press Impulse Sealer PFS-650

RM 850.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating Element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation.

Automatic Impulse Sealer WN-455A

RM 1800.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.

Hand Sealer FS-200

RM 90.00

Hand sealer is a convenient and economical sealing equipment for variety industries such as shops, home and factories. Hand sealer is convenient as it is easy to be operated and portable. This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. Suitable Heating Element: OD 0.5mm (round)

Hand Sealer FS-400

RM 170.00

Hand sealer is a convenient and economical sealing equipment for variety industries such as shops, home and factories. Hand sealer is convenient as it is easy to be operated and portable. This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. Suitable Heating Element: 0.2x3mm, OD 0.5mm (round)

Cling Wrap Tray Wrapping Sealer TW-450E

RM 550.00

Cling film Tray Wrapping Sealer incorporates two support rollers for the cling film Roll to be used and a stainless-steel support bridge that allows the film to pass under the product to be wrapped. It adopts electronic constant temperature control for cutting and shrinking. Cling film tray wrapping sealer is widely used to pack cling film on food, vegetable for retaining freshness, which is an ideal equipment for supermarket and buffet.

Foot Press Impulse Sealer PFS-450

RM 700.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation

Foot Press Impulse Sealer PFS-650

RM 850.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating Element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation.

Foot Type Manual Direct Heat Sealer W-300D

RM 1400.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.
** Installation can be request when using self-collect method.

Foot Type Manual Direct Heat Sealer W-450D

RM 1600.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Vertical Type (Stainless Steel) BS-770AII

RM 1800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Horizontal Type BS-770AIII

RM 1800.00

This machine is suitable for sealing small packaging products as the standard control panel consist of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Automatic Impulse Sealer WN-455A

RM 1800.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.

Automatic Impulse Sealer WN-605A

RM 2200.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Vertical Type (Stainless Steel) BS-810AII with Solid Ink Coding

RM 3800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Vertical Type (Stainless Steel) BS-810AII with Solid Ink Coding

RM 3800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Horizontal Type BS-810AIII with Solid Ink Coding

RM 3800.00

This machine is suitable for sealing small packaging products as the standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Automatic Impulse Sealer WN-605A

RM 2200.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Vertical Type (Stainless Steel) BS-770AII

RM 1800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Horizontal Type BS-770AIII

RM 1800.00

This machine is suitable for sealing small packaging products as the standard control panel consist of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Automatic Impulse Sealer WN-455A

RM 1800.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.

Foot Type Manual Direct Heat Sealer W-450D

RM 1600.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.

Foot Type Manual Direct Heat Sealer W-300D

RM 1400.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.
** Installation can be request when using self-collect method.

Foot Press Impulse Sealer PFS-650

RM 850.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating Element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation.

Foot Press Impulse Sealer PFS-450

RM 700.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation

Cling Wrap Tray Wrapping Sealer TW-450E

RM 550.00

Cling film Tray Wrapping Sealer incorporates two support rollers for the cling film Roll to be used and a stainless-steel support bridge that allows the film to pass under the product to be wrapped. It adopts electronic constant temperature control for cutting and shrinking. Cling film tray wrapping sealer is widely used to pack cling film on food, vegetable for retaining freshness, which is an ideal equipment for supermarket and buffet.

Hand Sealer FS-400

RM 170.00

Hand sealer is a convenient and economical sealing equipment for variety industries such as shops, home and factories. Hand sealer is convenient as it is easy to be operated and portable. This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. Suitable Heating Element: 0.2x3mm, OD 0.5mm (round)

Hand Sealer FS-400

RM 170.00

Hand sealer is a convenient and economical sealing equipment for variety industries such as shops, home and factories. Hand sealer is convenient as it is easy to be operated and portable. This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. Suitable Heating Element: 0.2x3mm, OD 0.5mm (round)

Hand Sealer FS-200

RM 90.00

Hand sealer is a convenient and economical sealing equipment for variety industries such as shops, home and factories. Hand sealer is convenient as it is easy to be operated and portable. This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. Suitable Heating Element: OD 0.5mm (round)

Foot Type Manual Direct Heat Sealer W-450D

RM 1600.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.

Foot Type Manual Direct Heat Sealer W-300D

RM 1400.00

Both jaws will be heated simultaneously to possess a better heat penetration for sealing thicker materials. Therefore, this machine is suitable to seal materials such as coated aluminium foil, gusseted bags or coated kraft paper. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

* Machine will be courier in box packaging and without installation.
** Installation can be request when using self-collect method.

Foot Press Impulse Sealer PFS-650

RM 850.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating Element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation.

Foot Press Impulse Sealer PFS-450

RM 700.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. By using the foot pedal, operator can use both hands to hold the bags to make an excellent and perfect sealing.

Suitable Heating element: 0.15mmx5mm (Flat), OD 0.5mm (Round)

* Machine will be courier in box packaging and without installation

Continuous Band Sealer Vertical Type (Stainless Steel) BS-810AII with Solid Ink Coding

RM 3800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Vertical Type (Stainless Steel) BS-770AII

RM 1800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Horizontal Type BS-810AIII with Solid Ink Coding

RM 3800.00

This machine is suitable for sealing small packaging products as the standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Horizontal Type BS-770AIII

RM 1800.00

This machine is suitable for sealing small packaging products as the standard control panel consist of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt.

Use Teflon belt size 770mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Cling Wrap Tray Wrapping Sealer TW-450E

RM 550.00

Cling film Tray Wrapping Sealer incorporates two support rollers for the cling film Roll to be used and a stainless-steel support bridge that allows the film to pass under the product to be wrapped. It adopts electronic constant temperature control for cutting and shrinking. Cling film tray wrapping sealer is widely used to pack cling film on food, vegetable for retaining freshness, which is an ideal equipment for supermarket and buffet.

Automatic Impulse Sealer WN-605A

RM 2200.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.