(03) 8210 5350 Customer Support

Showing 25–27 of 27 results

Teflon Belt 810x15x0.2mm

RM 10.00

Can be used in Continuous Band Sealer BS-810II and BS-810III

V Belt 428x6x4mm

RM 10.00

Can be used in Continuous Band Sealer BS-770II and BS-770III

V Belt 598x4.5x3.5mm

RM 12.00

Can be used in Continuous Band Sealer BS-810II and BS-810III

Heating Element 0.15mmx5mmx10m (Flat)

RM 150.00

Can be used in Impulse Sealer PFS-450, PFS-650, WN-450A and WN-605A

Heating Element 0.1mmx10mmx10m (Flat)

RM 400.00

Can be used in Vacuum Machine DZQ400, DZQ500

Heating Element OD 0.5mmx10m (Round)

RM 119.00

Can be used in Impulse Sealer machine

Automatic Impulse Sealer WN-605A

RM 2200.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Vertical Type (Stainless Steel) BS-810AII with Solid Ink Coding

RM 3800.00

Vertical continuous band sealer is suitable for sealing the products that is in liquid state or products that is spill able. Besides, this sealer is also work best with the product is pack using a stand-up pouch. The standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

Continuous Band Sealer Horizontal Type BS-810AIII with Solid Ink Coding

RM 3800.00

This machine is suitable for sealing small packaging products as the standard control panel consists of the temperature controller, speed controller, and also the switch for ON/OFF, heater and fan. Continuous band sealer is an excellent choice to increase packaging proficiency as it only involves little manual work. This machine is suitable for variety of plastic films and the seals are created using a Teflon belt. This machine works with solid-ink coder where labels could be print while sealing.

Use Teflon belt size 810mmx15mmx0.2mm

* Machine will be courier in box packaging and without installation.

V Belt 428x6x4mm

RM 10.00

Can be used in Continuous Band Sealer BS-770II and BS-770III

Ribbon 25mmx100m

RM 9.00

Can be used in Date Coder DY-8 and HP-280

Teflon Belt 770x15x0.2mm

RM 8.00

Can be used in Continuous Band Sealer BS-770II and BS-770III

Cling Wrap Tray Wrapping Sealer TW-450E

RM 550.00

Cling film Tray Wrapping Sealer incorporates two support rollers for the cling film Roll to be used and a stainless-steel support bridge that allows the film to pass under the product to be wrapped. It adopts electronic constant temperature control for cutting and shrinking. Cling film tray wrapping sealer is widely used to pack cling film on food, vegetable for retaining freshness, which is an ideal equipment for supermarket and buffet.

Automatic Impulse Sealer WN-605A

RM 2200.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.

Automatic Impulse Sealer WN-455A

RM 1800.00

This machine is known as impulse heat sealing where thermoplastic materials will be joined together by a moderate temperature and establish an effective seal. This machine does not require the warm up duration where it can be directly used after machine is on. Sealing can be operating automatically after the 3 timers (sealing time, congealing time and re-cycle or known as waiting time) had set accordingly. Manual can also be done by control using a foot switch (re-cycle time set to 0).

Suitable Heating Element: 0.15mmx5mm (Flat)

* Machine will be courier in box packaging and without installation.